MoonBeam3

MoonBeam3 Disinfection targets high-touch, high-frequency of touch surfaces. 
Unique, immediately portable, truly cost-effective UVC disinfection solution.
MoonBeam3 disinfecting ambulance
Interested in a MoonBeam3 demo? Please fill in the form below.

Powerful and Fast

A practical innovation for targeted disinfection, this compact, powerful solution reduces the time required to disinfect and solves the challenge of having equipment where you need it, when you need it. MoonBeam3 is designed for fast, on-demand disinfection of high touch surfaces such as EMS vehicles, ambulances, life flight, RTA systems, bathrooms and fixtures, keyboards, monitors and the full patient bed area in the hospital setting.

MoonBeam3 has individually adjustable UV-C heads, each generating a broad umbrella of intense UV-C light. The articulating heads can be positioned vertically and horizontally to direct the UV-C light to broad area disinfection surfaces from six inches to more than seven feet from the ground, and six feet outward. Modest cost, size and weight make MoonBeam3 a perfect addition to compact environments such as EMS vehicles and EVS carts or it can be easily hand carried to desired location.

The ability to easily adjust the heads allows maximum UV-C impact for efficient cycle times starting at 90 seconds for close targets, like ambulance stretchers or workstations on wheels, to three, five and ten minutes for disinfection applications. The user-friendly interface coupled with the efficient disinfection cycle makes MoonBeam3 the ideal choice for on-demand disinfection and as part of routine cleaning procedures of high touch surfaces.

diversey moonbeam3

Eliminating Pathogens

Eliminating pathogens is critical in the fight against COVID-19 and Hospital-Acquired Infections (HAIs), but there are two problematic aspects of typical disinfection technology: A) the time required to disinfect is too long, and B) the availability of the equipment – it’s never where you need it when you need it. MoonBeam3 addresses both! A typical disinfection cycle of 180 seconds using the three fast adjusting articulating UVC lamp heads provides thorough disinfection of the targeted surfaces. Making availability the order of the day is possible due to its lightweight, economical price, ergonomics and ease of use. These features allow Moonbeam3 units to be ready at moment’s notice. As an additional benefit, the on-going maintenance of MoonBeam3 is simple – no tools required bulb replacement.

MoonBeam3

Versatile and Effective

MoonBeam3 has three individually adjustable heads, each generating a broad umbrella of intense, 254 nanometer wavelength, UV-C light. The articulating heads can be positioned vertically and horizontally to direct the UV-C light to broad area disinfection surfaces from six inches to more than seven feet from the ground and six feet outward. This versatility allows users to position the heads in close proximity to multiple targeted surfaces allowing maximum UV-C dose to be applied. Not only is MoonBeam3 highly effective it’s also very efficient, boasting four selectable cycle times starting from just 90 seconds. The selection of the most appropriate cycle time is achieved through the user-friendly interface with push button simplicity (we actually recommend setting the system to 3 or 5 minutes and leaving it there as the power of the system allows these cycle lengths to be very effective). Rapid disinfection cycles and effective results make MoonBeam3 the ideal choice for on-demand disinfection and easy to integrate into routine cleaning procedures of high-touch surfaces.-

Simple Operation

Just remember the 3Ps:

Plug in. Position heads. Press start.

That’s it! The Remote Cover is placed outside of the area where disinfection is taking place and, when not in use, houses the complete system for easy transport and storage.

Portable & Cost Effective

MoonBeam3 is immediately portable with its light weight and compact form factor, but it is the low cost, ergonomic design and efficiency that sets MoonBeam3 apart. The affordable price point makes placement on every floor or ward a practical reality. From a workflow perspective, a typical MoonBeam3 disinfection cycle is 180 seconds, introducing groundbreaking efficiency in the fight against cross-contamination and healthcare-associated infections (HAIs).  This is a truly cost-effective solution, addressing the two most problematic aspects of typical disinfection technology: the time required to disinfect and the availability of the equipment. As an additional benefit, the on-going maintenance is simple — bulb replacement, no-tools required.

diversey moonbeam3 cover base
  • Ambulance and EMS vehicles
  • RTA systems 
  • Life flight 
  • Police cruisers 
  • Fire stations 
  • Bed rails/controls 
  • Call box/button 
  • Phone 
  • Over-bed table 
  • Bedside table 
  • Patient monitor
  • IV pole (grab area)
  • Toilet/handle/seat
  • Room/bathroom sink
  • Keyboard/monitor
  • WOWs …And more

Safety Assured! Multiple exit and entry points? No problem.

Moonbeam3 is not only highly effective, it is also incredibly safe to operate. For environments with multiple exit/entry points, MoonBeam3 easily pairs with Sentry, an optional infrared motion sensing disc that communicates with MoonBeam3. Up to two Sentry’s can be paired with a single MoonBeam3 in more complex room arrangements, directed to avoid interruption from inanimate object motion such as curtains. Providing multiple levels of defense, the design reflects thoughtful, practical integration of accelerometers and infrared motion sensing plus high visibility control. 

EPA Registered Facility

Manufactured per ISO 13485 QSR, EPA registered establishment

MENU